Iran International Frequency Information
Iran International is a well-known Persian-language news and entertainment channel that broadcasts a wide range of programming, including news, politics, and cultural content. The channel is transmitted via the Eutelsat Hot Bird 13B/C/E satellites, which cover a large portion of Europe, the Middle East, and North Africa. Below are the detailed parameters for accessing Iran International:
Satellite Information for Iran International
- Satellite(s): Eutelsat Hot Bird 13B/C/E, 13E
Iran International is broadcast via the Eutelsat Hot Bird 13B/C/E satellites, located at the 13° East orbital position. These satellites provide extensive coverage, including Europe, the Middle East, and North Africa, making the channel easily accessible to a large audience in these regions. - Broadcasting Standard: DVB-S2 (8PSK)
The channel uses the DVB-S2 (Digital Video Broadcasting – Satellite – Second Generation) standard, which is the advanced version of the DVB-S system. It provides more efficient use of bandwidth, higher data rates, and better video quality, particularly important for high-quality broadcasts like news and live events. The modulation method used is 8PSK (8 Phase Shift Keying), which increases bandwidth efficiency. - Compression: MPEG-4
Iran International is compressed using the MPEG-4 video codec, which allows for efficient video compression while maintaining high video quality. MPEG-4 is more efficient than older codecs like MPEG-2, allowing the channel to deliver clearer video at lower bitrates, making it ideal for satellite transmission. - Frequency: 11373 MHz
The downlink frequency for receiving Iran International is 11373 MHz in the Ku-band. This frequency needs to be set in your satellite receiver to access the channel. - Polarization: Horizontal (H)
The channel is broadcast with horizontal polarization, meaning that your satellite dish must be aligned to receive horizontally polarized signals for optimal reception. - Symbol Rate: 27500 ksymb/sec
The symbol rate of 27500 ksymb/sec (kilobits per second) is used for data transmission. This ensures efficient and uninterrupted delivery of the channel’s content, ensuring clear video and audio quality for the viewers. - FEC (Forward Error Correction): 3/4
The FEC rate of 3/4 is used to correct errors that may occur during transmission. This rate helps maintain a stable and high-quality signal by correcting up to 25% of lost or corrupted data during transmission, ensuring minimal disruptions in the broadcast. - Service ID: 501
The Service ID for Iran International is 501, which uniquely identifies the channel in the satellite’s broadcast stream. This ID helps satellite receivers to correctly identify and tune into the correct stream. - Video PID (Packet Identifier): 5011
The Video PID for Iran International is 5011, which is used to identify the video stream. This identifier ensures that the satellite receiver knows where to find and decode the video data. - Encryption: FTA (Free-to-Air)
Iran International is transmitted as FTA (Free-to-Air), meaning it is not encrypted and does not require a subscription or decryption device. Viewers can tune into the channel directly without any need for access cards or additional fees.
Conclusion
To access Iran International on the Eutelsat Hot Bird 13B/C/E satellites, use the following settings:
- Frequency: 11373 MHz
- Polarization: Horizontal (H)
- Symbol Rate: 27500 ksymb/sec
- FEC: 3/4
- Service ID: 501
- Video PID: 5011
The channel’s DVB-S2 transmission standard and MPEG-4 compression provide high-quality video and audio. The FTA (Free-to-Air) transmission makes it easily accessible to viewers in the coverage area without the need for any encryption or subscription.
By tuning to the correct settings, viewers across Europe, the Middle East, and North Africa can enjoy uninterrupted access to Iran International’s programming, which includes news, documentaries, and live events.
